Step 1: Fill The Basin With Water

Begin by filling the basin with regular tap water. Make sure the water level is above the "MIN" line and below the "MAX" line. 

You can also add optional fragrances (from our Fragrance Pack) or a cap of our Ocean Breeze Deodorizer directly into the water before cleaning.

 

Step 2: Attach Main Unit To The Basin

Use the two clamps to secure the main Sirena unit to the water basin. Then put the unit with the basin attached onto the dolly. Connect the Power Nozzle or the wet/dry hose to the intake and you're ready to start cleaning!

 

 

Step 3: Use Different Attachments to Clean Your Entire Home!

Mix and match hoses, extension wands, and attachments to reach everywhere and clean everything around the house.

 

 

Step 4: Detach Water Basin From Main Unit

All done? Detach the main unit from the basin and take a look inside. You'll be amazed, and shocked, at the unseen dirt Sirena captures.

 

Step 5: Discard The Dirty Water And Clean The Basin

There are 3 ways to discard the dirty water:

1. Dump the water outside in your backyard.
2. Flush the water in the toilet (in most cases it's completely safe and won't clog your pipes).
3. Carefully drain the water (tip: use cheesecloth) and throw the leftovers in the garbage (recommended if you're not comfortable flushing everything in the toilet).